AGP Picks
View all

JJY compares T300 and T700 carbon fiber for high-performance composites

Oct. 29, 2026
JJY compares T300 and T700 carbon fiber for high-performance composites
By AI, Created 06:21 UTC, Oct 29, 2026, AGP -

JJY released a technical evaluation in Shenzhen comparing T300 and T700 carbon fiber grades for aerospace, drones, robotics, and other lightweight engineering uses. The analysis focuses on strength, stiffness, impact resistance, and manufacturing formats to help buyers match material choice to performance needs.

Why it matters: - Material choice determines whether a composite part prioritizes cost, rigidity, impact resistance, or weight savings. - The comparison is aimed at aerospace, FPV drones, robotics, sporting goods, and other applications where structural margins matter. - JJY positions both grades as part of its carbon fiber product line for industrial customers.

What happened: - JJY published a technical evaluation in Shenzhen, Guangdong, China, on Oct. 29, 2026. - The report compares T300-grade and T700-grade carbon fiber for mechanical performance and application fit. - JJY says its manufacturing range covers sheet sizes from 400x500mm to 3000x6000mm and thicknesses from 0.2mm to 50mm. - The company highlights product formats including high-tensile prepregs, lightweight plates, CNC-machined parts, 3K Finish Sheets, 100% unidirectional UD carbon fiber sheets, and hitting surface cores for pickleball paddles. - A company portal is available at More information.

The details: - T300 carbon fiber has a tensile strength of about 3530 MPa. - T700 carbon fiber has a tensile strength of about 4900 MPa, or roughly 38% higher than T300. - Both grades have similar tensile modulus, with T300 around 230 GPa and T700 around 240 GPa. - Both grades have similar density, at about 1.76 to 1.80 grams per cubic centimeter. - T700 delivers a higher strength-to-weight ratio because density stays nearly the same while tensile strength rises. - T700 has elongation at break of about 2.1%, compared with about 1.5% for T300. - JJY says the higher elongation gives T700 better resistance to brittle fracture under sudden overloads. - The evaluation says prepreg systems improve consistency by embedding fibers in a controlled epoxy matrix. - Unidirectional prepregs place fibers in one direction to maximize directional performance and reduce crimp-related losses found in woven fabrics. - The report says fiber areal weight and resin content must be tightly controlled to avoid voids during cure. - Voids can become stress concentration points and trigger delamination under shear stress. - T300 UD prepreg is described as compatible with autoclave, vacuum bagging, and compression molding processes. - JJY says T300 prepreg suits large industrial components and sporting goods where extreme tensile performance is not required. - T700 unidirectional prepreg uses surface treatment to improve bonding with advanced epoxy systems. - JJY says that improved interface supports better stress transfer and fatigue resistance under cyclic loading. - JJY says its material architectures also include 3K + UD + 3K symmetrical layups and 100% UD sheet constructions.

Between the lines: - The comparison frames T700 as the higher-performance option for impact-prone or safety-critical designs. - T300 is presented as the more economical choice for applications where stiffness and predictable behavior matter more than maximum strength. - The emphasis on prepreg control, void reduction, and layup structure suggests the company is selling not just raw fiber grades, but finished composite systems. - The drone-frame examples show how a small material upgrade can translate into thinner parts, lower weight, and longer flight time.

What's next: - Engineers and buyers are expected to use the comparison to select the right grade for their load case, cost target, and manufacturing method. - JJY says customized carbon fiber frames are available across sizes from 3-inch to 24-inch and other structural configurations. - The company is likely to continue positioning T700 for high-stress applications and T300 for rigid, cost-sensitive builds.

The bottom line: - T300 remains the practical baseline for rigid industrial parts. - T700 is the stronger, lighter, and more damage-tolerant option when performance margins matter most.

Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.

Sign up for:

China Science & Technology

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

China Science & Technology

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.