AGP Picks
View all

Suzhou CMT pitches turnkey fiber cement board production lines

Oct. 26, 2026
Suzhou CMT pitches turnkey fiber cement board production lines
By AI, Created 07:57 UTC, Oct 26, 2026, AGP -

Suzhou CMT Engineering is promoting end-to-end fiber cement board production line projects that cover planning, equipment fabrication, installation, commissioning and operator training. The offering targets manufacturers that want to produce non-combustible, moisture-resistant panels with consistent strength and dimensional control.

Why it matters: - Fiber cement board plants need tightly coordinated forming, pressing, autoclaving and finishing systems to produce panels with consistent strength and dimensional accuracy. - The turnkey model is aimed at manufacturers that want a single contractor to handle engineering, equipment supply, installation and startup. - Fiber cement boards are positioned for use in exterior facades, interior drywall, ceiling tiles and acoustic underlayment.

What happened: - Suzhou CMT Engineering Co., Ltd. outlined an integrated engineering approach for fiber cement board production lines in Changshu, Jiangsu, China. - The company described single-point EPC delivery that covers raw material dosing, forming cylinders, autoclaves, finishing sanders and operational handoff. - The company pointed prospective customers to its project site for production-line specifications.

The details: - Engineering teams evaluate Portland cement grades, silica sand fineness and cellulose reinforcement fibers before selecting Hatschek wet forming or continuous flow-on technology. - Hatschek wet forming uses rotating wire-mesh vat cylinders to filter dilute slurries of cement, silica and cellulose fibers onto permeable dewatering felts. - Accumulating size roll laminating builds the green sheet layer by layer until an automated cut-off wire severs it at the target thickness. - Continuous flow-on extrusion deposits slurry directly onto moving dewatering wire screens and is positioned for boards thicker than 20 millimeters. - Hatschek forming is described as better for multi-ply bonding and directional fiber alignment in thin boards between 4 and 12 millimeters. - Automated slurry consistency controls keep vat solids concentrations between 6% and 10%. - Needle-punched polyamide dewatering felts are used for water permeability and chemical resistance. - High-vacuum suction boxes lower green sheet moisture below 30% before the size roll. - Slurry recirculation loops and ultrasonic level sensors keep solids suspended and vat depths constant. - Heavy hydraulic stack presses apply up to 10,000 kilonewtons and raise density above 1.4 g/cm³. - Pre-curing tunnels run at 50C to provide initial hydration strength before de-stacking. - Horizontal steel autoclaves cure boards at 170C to 190C and 8 to 12 bar for 8 to 12 hours. - The hydrothermal process converts calcium silicate hydrates into crystalline tobermorite, which reduces moisture expansion. - Autoclave systems include quick-opening hydraulic safety doors, dual mechanical interlocks and condensate recovery. - Multi-point temperature sensors monitor steam gradients across the autoclave length. - Diamond-tipped milling cutter heads hold thickness tolerances within plus or minus 0.2 millimeters. - Four-edge trimming and chamfering stations cut boards square and can form tongue-and-groove or beveled edges. - Wide-belt multi-head sanding polishes faces from 80 to 240 mesh. - Dust collectors, spark detection systems, robotic stackers and automatic strapping machines are part of the finishing and packaging line.

Between the lines: - The process description shows how much fiber cement board quality depends on controlling water, pressure, heat and fiber dispersion at each stage. - The emphasis on ASME pressure vessel, CE machinery and ISO 9001 benchmarks suggests the offering is aimed at international buyers. - The commissioning plan is designed to reduce startup risk by separating mechanical cycling, slurry calibration and commercial production trials.

What's next: - The commissioning sequence includes water runs, slurry dosing dry runs and a 72-hour commercial performance test. - Local operators are expected to receive classroom instruction and control-room training before handoff. - Suzhou CMT says operating manuals will cover preventive maintenance and troubleshooting for critical drives.

The bottom line: - Suzhou CMT is marketing a full-service fiber cement board plant package that bundles process engineering, pressure-vessel systems and startup support into one delivery model.

Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.

Sign up for:

China Science & Technology

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

China Science & Technology

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.